V
VT Axial Flow / Mixed Flow & Propeller
Sector applications
| Energy | Engineering |
| Fire | Industry |
| Oil & Gas | Water |
Vertical Turbine Pumps
Vertical Turbine Pumps
Where the fire protection water source is located below ground or deck level, a multi-stage vertical suspended water pump is the best solution.
In this type of pump the impellers are fully immersed in water, maintaining priming at all times. The pumps are driven by vertical electric motors or by diesel engines through a right-angle gearbox.
TYPICAL INSTALLATIONS:
- Manufacturing Facilities
- Warehouses
- Power Stations & Refineries
- Fuel Storage Depots
TYPICAL APPLICATIONS:
- Sprinkler systems
- Hydrant systems
- Deluge systems
- Monitor systems
- Water curtains
V
Hãy là người đầu tiên nhận xét “Vertical Turbine Pumps”
Sản phẩm tương tự
SPP
Split Case Pumps
Split case centrifugal pumps feature a single double suction or two single suction impellers supported between bearings. The casing is split axially, with opposing suction and discharge flanges, greatly simplifying maintenance.
With balanced bearings and a robust overall design it’s not uncommon to find SPP horizontal split case pumps still in use after 70 years of service.
Suitable for electric or diesel drives, split case pump duties range from around 760 litres/min to 19,000 litres/min.
SPP Pumps also boasts the largest UL Listed horizontal fire pump to date - with a capacity of 8,000 USgpm.
TYPICAL INSTALLATIONS:
- Airports
- Manufacturing Facilities
- Warehouses
- Power Stations & Refineries
- Data Centres
- Fuel Storage Depots
- Water treatment and supply
- Water extraction
- Booster pumping
- Cooling tower circulation
- Process and industrial utility duties
- Petrochemical utility duties
- Hot Water circulation
- Sea water lift
TYPICAL APPLICATIONS:
- Sprinkler systems
- Hydrant systems
- Deluge systems
- Monitor systems
- Water curtains
Resi-Stream Pumps
New Fire Pump Range for Residential Buildings
SPP’s Resi-Stream range for residential fire sprinkler applications incorporates a motor control panel, which via hmi enables an easily adjustable automatic test cycle as standard. Control panel options include an Automatic Transfer Switch (ATS) version among others. All components are mounted on a compact common baseplate for ease of installation.
Please follow the link below to find out more about our EN 12259-12 & BS9251 compliant fire pump packages.
Learn more about SPP's Resi-Stream range >
TYPICAL INSTALLATIONS:
- Offices
- Hotels
- Residential Buildings
- Tunnels
- Mixed Use Buildings
TYPICAL APPLICATIONS:
- Residential Sprinkler systems
SPP
Multistage Pumps
Ideal for high head applications, SPP’s range of Horizontal and Vertical Multistage pumps is designed for applications that require a heavy-duty long-life pump.
WHAT ARE MULTISTAGE PUMPS?
Multistage pumps are designed to transfer clean liquids through several impellers that are built into a series, as opposed to one and are typically useful in installations where a high head is needed. High-pressure applications can be achieved by installing the impellers on the same shaft of the multistage pump or parallel to each other on opposing shafts for higher flow rates. They are primarily useful for energy saving and different ranges of flow/head circumstances. The heavy-duty, multistage pump boasts a variety of construction material options and generously rated bearings meet the demands of both water and industrial applications. CFD-tuned hydraulics and state-of-the-art manufacturing techniques optimise efficiencies and minimise running costs, whilst rigid, durable and fabricated steel baseplates prevent distortion. Dependant on your requirements, the multistage pump can be installed either vertically or horizontally. In situations where floor space is limited, vertical pumps are usually more suitable, whereas the horizontal orientation of a multistage pump can be especially useful in a condition with low headroom, often regarding indoor applications.HOW DO MULTISTAGE PUMPS WORK?
Multistage pumps work in connected stages. The process starts where the liquid will enter a chamber at the suction line pressure and will then exit at an elevated pressure before entering the next chamber. This process can continue multiple times and the more chambers the multistage pump has, the higher the achievable pressure can be. The number of industries and sectors that can benefit from the multistage pump is virtually endless and there are many examples of where they might be applied.- Pressure Boosting
- High-Pressure Shower/Spray (Sprinklers or Fire Fighting)
- Heating/Cooling Conditioning
- Reverse Osmosis
- Mine Dewatering
- Snow Making
- Boiler Feed
- Desuperheater Feed
CONFIGURATION
Ring section diffuser casings in either horizontal or vertical configuration.
Pleuger Industries Submersible Pumps
Built for a wide range of applications within the water, marine, offshore, oil & gas, and mining industries.
This range of pumps is fully submersible, and features products available in a wide variety of sizes and designs, providing pumping solutions for a wide variety of applications.
TYPICAL INSTALLATIONS:
- Boreholes
- Water Treatment
- Mines
- Docks
TYPICAL APPLICATIONS:
- Potable Water Supply
- Water level control & draw down
- Water treatment & distribution
- Flood Protection
- Pressure boosting
- Mining (dewatering & water supply)
- Irrigation & drainage
- Boreholes
Vertical Multistage Inline Pumps
Only Available in Asian Markets
FEATURES
- Suitable for transferring liquids of low viscosity, non-inflammable and non-explosive, not containing solid particles or fibers
- Water supply & drainage for high-rise buildings, filtration and transfer at waterworks, pressure boosting in main pipe
- Washing and cleaning systems, boiler feeding, cooling water circulation, water treatment systems, auxiliary system, support equipment
- Ultra-filtration systems, reverse-osmosis systems, distillation systems, separators, swimming pools
- Agriculture irrigation: sprinkler irrigation, drip-feed irrigation
- Food & beverage industry
- Fire-fighting system
TYPICAL APPLICATIONS:
- Building Water Supply
- Fire Fighting System
- Boiler Feed Water
- Water Works
- Water Treatment
- Irrigation System
Vertical Inline Centrifugal Pumps
SPP Pumps vertical inline centrifugal pumps are lightweight and compact with an upright design, ideal for smaller pump rooms and installations where space is confined. Due to their inline structure, these high performance single stage centrifugal pumps provide high-end liquid travel.
SPP vertical in-line pumps are available for duties from 200 to 1500 US gallons per minute (USGPM) and are suitable for electric drives only. These high performance pumps can also be offered as pre-wired packages that include a limited or full-service controller. Every package is mounted on a steel fabricated base with the motor wired to the controller. The automatic air relief valve, casing relief valve, suction gauge and discharge gauge are mounted on their respective spool pieces.
Additional piping, valves and sensing lines are available with the in-line packages. This package also includes a jockey pump and jockey pump controller.
The pump holds a vertical motor allowing for easy access to pump internals for maintenance and repairs.
TYPICAL INSTALLATIONS:
- Office Buildings
- Hospitals, Airports
- Manufacturing Facilities
- Power Stations
- Pharmaceutical Facilities
TYPICAL APPLICATIONS:
- Sprinkler Systems
- Hydrant Systems
- Deluge Systems
- Monitor Systems
- Water Curtain
End Suction Pumps
This reliable design has become the most common centrifugal pump arrangement with its horizontal shaft, overhung impeller and bearing arrangement with the added bonus of being space-saving for your application.
A Reliable Centrifugal Pump
The highly efficient end suction pump is one of the simplest types of centrifugal pump that features motor slide rails and a back pull out design allowing for ready access and ease of maintenance. It’s a precision-made pump suitable for electric/diesel drives, designed to withhold temperatures of up to 580°F.TYPICAL INSTALLATIONS:
- Supermarkets
- Hospitals
- Schools and Colleges
- Hotels
- Office Buildings
TYPICAL APPLICATIONS:
- Sprinkler systems
- Hydrant systems
- Monitor systems
- Water curtains
Contractors Pumps
First developed by SPP Pumps in 1888, the vacuum-assisted, self-priming Dewatering range has become the benchmark for reliable, durable and compliant pump Dewatering solutions.
Manoeuvrable and versatile, contractor autoprime pumps are supplied either in open set configuration or, for quiet, unobtrusive operation, with an acoustic canopy enclosure. With an extensive range spanning stocked products and custom-built pump sets, dewatering is the solution of choice for thousands of demanding, project-critical applications in the UK and overseas.
Dewatering purchasers include rental organisations, civil works contractors, utility companies, local authorities and municipalities and open cast mining operations.
Đánh giá
Chưa có đánh giá nào.