Split Case Pumps
Split Case Pumps
Split case centrifugal pumps feature a single double suction or two single suction impellers supported between bearings. The casing is split axially, with opposing suction and discharge flanges, greatly simplifying maintenance.
With balanced bearings and a robust overall design it’s not uncommon to find SPP horizontal split case pumps still in use after 70 years of service.
Suitable for electric or diesel drives, split case pump duties range from around 760 litres/min to 19,000 litres/min.
SPP Pumps also boasts the largest UL Listed horizontal fire pump to date – with a capacity of 8,000 USgpm.
TYPICAL INSTALLATIONS:
- Airports
- Manufacturing Facilities
- Warehouses
- Power Stations & Refineries
- Data Centres
- Fuel Storage Depots
- Water treatment and supply
- Water extraction
- Booster pumping
- Cooling tower circulation
- Process and industrial utility duties
- Petrochemical utility duties
- Hot Water circulation
- Sea water lift
TYPICAL APPLICATIONS:
- Sprinkler systems
- Hydrant systems
- Deluge systems
- Monitor systems
- Water curtains
Hãy là người đầu tiên nhận xét “Split Case Pumps”
Sản phẩm tương tự
Vertical Multistage Inline Pumps
Only Available in Asian Markets
FEATURES
- Suitable for transferring liquids of low viscosity, non-inflammable and non-explosive, not containing solid particles or fibers
- Water supply & drainage for high-rise buildings, filtration and transfer at waterworks, pressure boosting in main pipe
- Washing and cleaning systems, boiler feeding, cooling water circulation, water treatment systems, auxiliary system, support equipment
- Ultra-filtration systems, reverse-osmosis systems, distillation systems, separators, swimming pools
- Agriculture irrigation: sprinkler irrigation, drip-feed irrigation
- Food & beverage industry
- Fire-fighting system
TYPICAL APPLICATIONS:
- Building Water Supply
- Fire Fighting System
- Boiler Feed Water
- Water Works
- Water Treatment
- Irrigation System
Vertical Inline Centrifugal Pumps
SPP Pumps vertical inline centrifugal pumps are lightweight and compact with an upright design, ideal for smaller pump rooms and installations where space is confined. Due to their inline structure, these high performance single stage centrifugal pumps provide high-end liquid travel.
SPP vertical in-line pumps are available for duties from 200 to 1500 US gallons per minute (USGPM) and are suitable for electric drives only. These high performance pumps can also be offered as pre-wired packages that include a limited or full-service controller. Every package is mounted on a steel fabricated base with the motor wired to the controller. The automatic air relief valve, casing relief valve, suction gauge and discharge gauge are mounted on their respective spool pieces.Additional piping, valves and sensing lines are available with the in-line packages. This package also includes a jockey pump and jockey pump controller.The pump holds a vertical motor allowing for easy access to pump internals for maintenance and repairs.
TYPICAL INSTALLATIONS:
- Office Buildings
- Hospitals, Airports
- Manufacturing Facilities
- Power Stations
- Pharmaceutical Facilities
TYPICAL APPLICATIONS:
- Sprinkler Systems
- Hydrant Systems
- Deluge Systems
- Monitor Systems
- Water Curtain
Solids Handling and Solids
SHM are horizontal non-clog pumps having single stage, single suction with back pull out type design. SHS are vertical non-clog pumps for wet pit applications. The pump section is suspended by a column pipe which also protects the transmission shaft.
These pumps can be offered with a column length up to 6.5 m. The impeller is single suction type non-clog, free flow dynamically balanced. For SHM pumps the standard lubrication is grease and the optional one is oil. In case of SHS pumps the lubrication is grease based. These pumps are widely used in paper industries, for water carrying gravel, sewage collection and so on.
FEATURES:
- Solid size up to 105 mm
- Back pull-out design
- Gland packed / Mechanical Seal
- 50 Hz / 60 Hz availability
- Also available in vertical execution
APPLICATIONS:
- Sludge
- Sewage
- Power material slurries
- Sugar factory waste
End Suction Pumps
This reliable design has become the most common centrifugal pump arrangement with its horizontal shaft, overhung impeller and bearing arrangement with the added bonus of being space-saving for your application.
A Reliable Centrifugal Pump
The highly efficient end suction pump is one of the simplest types of centrifugal pump that features motor slide rails and a back pull out design allowing for ready access and ease of maintenance. It’s a precision-made pump suitable for electric/diesel drives, designed to withhold temperatures of up to 580°F.TYPICAL INSTALLATIONS:
- Supermarkets
- Hospitals
- Schools and Colleges
- Hotels
- Office Buildings
TYPICAL APPLICATIONS:
- Sprinkler systems
- Hydrant systems
- Monitor systems
- Water curtains
Pleuger Industries Submersible Pumps
Built for a wide range of applications within the water, marine, offshore, oil & gas, and mining industries.
This range of pumps is fully submersible, and features products available in a wide variety of sizes and designs, providing pumping solutions for a wide variety of applications.
TYPICAL INSTALLATIONS:
- Boreholes
- Water Treatment
- Mines
- Docks
TYPICAL APPLICATIONS:
- Potable Water Supply
- Water level control & draw down
- Water treatment & distribution
- Flood Protection
- Pressure boosting
- Mining (dewatering & water supply)
- Irrigation & drainage
- Boreholes
Fire Water Pumps
Our fire pump packages are delivered complete and ready for installation, incorporating pumps, drivers, control systems and pipework all in a single container. Designed, built and tested at our factory, these packages are effective and fully functional the first time and every time.
Transformer Oil Pumps
The inline and elbow transformer oil pumps are dependent on their oil cooler pump system, which is a fundamental component. With 90 years of product reliability and expertise in transformer oil pumps and transformer cooler systems, SPP has proven to give the transformer the support it demands.
Optimum Performance and Reliability
- An all new, purpose built British oil pump factory with automated facilities, enabling high volume outputs, low lead times and ultra-efficient manufacturing to optimise product value.
- All pumps are fully performance and pressure tested on hot oil to surpass the latest European legislation checks giving total performance assurance.
Highly Efficient Centrifugal Pumps
- Highly efficient and quiet running European motors designed specifically for our oil pumps
- Pressure die cast cases and impellers offer the optimum product quality and value
- Aluminium cases and impellers give a corrosion resistant, tough, yet lightweight product. The weight reduction compared to a cast iron pump reduces the stresses on the pipework supporting the pump and makes for a unit that is easier to lift for installations.
- Long product operational lives provide the ultimate in product life cycle value.
- An extensive range of product provides a wider choice and solutions suited for all transformer cooler sizes, deigns and applications.
- Inline and elbow pumps
- Centrifugal and axial flow impellers
- Size rage of 50mm to 250mm bore suction and discharge
- 50hz or 60hz, three or single phase, multiple voltages
- 2,4, and 6 pole motor options
- Up to -50 degrees Celsius ambient temperature options
- Water submersible pumps
- Extensive paint options, including certified marine specification paint finishes
- Flexibility for bespoke customer type testing and specifications
SPP
API Pumps
Our centrifugal API pumps come in single, two stage or multi-stage. Providing the very best in pump performance and reliability, the API sets the standard in the engineering and oil and gas pumping industries.
Performance Driven Pumps
The API range from SPP Pumps is highly efficient and delivers a superior performance in many industries and applications. Maintenance is to a minimum due to a balanced axial thrust and impeller configuration.The SPP Pumps’ API 610 range for hydrocarbon applications complements our fire and seawater lift product ranges.All of our sites are ISO9001:2015, ISO14001:2015 and OHSAS 18001:2007 approved. The company also has ISO/TS 29001 certification; the required quality management system (QMS) requirement for companies supplying to International Petroleum, Petrochemical and Natural Gas Industries.Over 500 staff, including 50 specialist engineers, provide round-the-clock advice and support for performance-critical pumping operations, for some of the world’s largest organisations.PROVEN DESIGN FEATURES FOR SUPERIOR PERFORMANCE AND ENDURANCE.
Offering performance features specifically engineered for the rigors of petrochemical oil & gas applications, SPP Pumps’ API 610 latest edition pump range sets the standard for fully compliant design…- Pump design life exceeds API 610 requirements
- Casing thickness can be designed to exceed API for enhanced life
- Bearing design life exceeds API standards, assured to at least 40,000 hours with continuous operation at rated condition
- Bearing housings equipped with high quality bearing isolators and magnetic drain plugs to prevent contamination
- Pumps designed with Stable head / flow characteristics
- Close radial running clearances between case and impeller wear rings for increased efficiency
- All radially split case pumps have metal to metal fit with confined controlled compression gaskets
- Shaft deflection at mechanical seal is below 50 μm under the most severe operating conditions thus improving seal reliability
- API 682 seal and seal systems ensure extended uninterrupted service life
- Condition monitoring options available
- Flexible Engineering team to accommodate client specific design requirements
Đánh giá
Chưa có đánh giá nào.